The accelerator of the fire truck engine is generally controlled by the pedal, also known as the accelerator pedal, which is a device for controlling the fuel supply of the vehicle engine.
The accelerator pedal should be operated with the right heel on the floor of the cab as the fulcrum, and the sole of the foot should be lightly stepped on the accelerator pedal. Use the flexion and extension of the ankle joint to step down or relax. When stepping on and releasing the accelerator pedal, use gentle force and To step and lift slowly.
When starting the engine of the fire truck, do not step on the accelerator pedal to the bottom. It is better to be slightly higher than the idle accelerator. When starting, it is better to refuel slightly before the clutch linkage point. Coordinated and agile.
During the operation of the fire truck, the throttle should be increased or decreased according to the road conditions and actual needs. The selected gear should be appropriate, so that the engine runs at a medium speed and a large throttle most of the time to save fuel. The coordination of oil, stepping on the clutch and stepping on the accelerator pedal should be coordinated.
Do not step on the accelerator pedal when the fire truck is going uphill. When using a low speed gear, it is generally advisable to step down the accelerator halfway. 3. When the engine still cannot increase the speed correspondingly, it should be shifted into a lower gear, and then depress the accelerator pedal to accelerate.
Before the fire engine stops and the engine is turned off, the accelerator pedal should be released first, and the accelerator pedal should not be slammed.
General essentials: step lightly and lift slowly, accelerate in a straight line, exert force softly, not too hastily, work on tiptoes without shaking suddenly.
Post time: Apr-21-2023